% \iffalse meta-comment
%
% Copyright (C) 2021 by Wybo Dekker <wybo@dekkerdocumenten.nl>
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License (LPPL), either
% version 1.3c of this license or (at your option) any later
% version.  The latest version of this license is in the file:
%
% http://www.latex-project.org/lppl.txt
%
% This work consists of the self-extracting file proofread.dtx
% Installation: see the readme section above.
%
%<*internal>
\iffalse
%</internal>
%<*readme>
# proofread
      key | description
      ---:|:---
proofread | Commands for inserting annotations
  version | 1.00
     date | 2022/03/17 
   author | Wybo Dekker
    email | wybo@dekkerdocumenten.nl
  license | Released under the LaTeX Project Public License v1.3c or later

# Short description:
The proofread package defines a few LaTeX commands that are useful
when you proofread a latex document. These allow you to easily highlight
text and add comments in the margin. Vim escape sequences are provided
for inserting these LaTeX commands in the source. The package is based
on code for a text highlighting command that was published by Antal
Spector-Zabusky in http://tex.stackexchange.com/questions/5959. The main file,
proofread.dtx, is self-extracting, so you can generate the style file by
compiling proofread.dtx with pdflatex.

# Installation:
This is a self-extracting file. Install as follows:
1. Run "tex proofread.dtx"
2. Run "sh make.sh"
3. Run "make install" to install in the local tree (needs sudo rights), or
   Run "make inst" to install in your own tree.
4. Run "make clean" to remove most intermediate files, or
   Run "make Clean" to keep the dtx file and CTAN zip only.
5. Run "make zip" to create a zip file for CTAN
6. Try "make help"
%</readme>
%<*make>
uudecode etc.uue
tar xf etc.taz
make
make help
%</make>
%<*etc>
begin-base64 644 etc.taz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====
%</etc>
%<*internal>
\fi
\def\nameofplainTeX{plain}
\ifx\fmtname\nameofplainTeX\else
  \expandafter\begingroup
\fi
%</internal>
%<*install>
\input docstrip.tex
\keepsilent
\askforoverwritefalse
\usedir{tex/latex/proofread}
\generate{
  \file{\jobname.sty}{\from{\jobname.dtx}{package}}
}
%</install>
%<install>\endbatchfile
%<*internal>
\usedir{source/latex/proofread}
\generate{
  \file{\jobname.ins}{\from{\jobname.dtx}{install}}
}
\nopreamble\nopostamble
\usedir{doc/latex/proofread}
\generate{
  \file{README.txt}{\from{\jobname.dtx}{readme}}
}
\ifx\fmtname\nameofplainTeX
  \expandafter\endbatchfile
\else
  \expandafter\endgroup
\fi
%</internal>
% \fi
%
% \iffalse
%<*driver>
\ProvidesFile{proofread.dtx}
%</driver>
%<package>\NeedsTeXFormat{LaTeX2e}[2021/11/15]
%<package>\ProvidesPackage{proofread}
%<*package>
    [2022/03/17 v1.00 Commands for inserting annotations]
%</package>
%<*driver>
\documentclass{ltxdoc}
\usepackage[a4paper,margin=20mm,left=50mm,nohead]{geometry}
\usepackage[numbered]{hypdoc}
\usepackage{\jobname}
\usepackage{longtable}
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\begin{document}
  \DocInput{\jobname.dtx}
\end{document}
%</driver>
% \fi
%
% \GetFileInfo{\jobname.dtx}
% \DoNotIndex{\AtBeginDocument, \DeclareOption, \DeclareRobustCommand,
% \DoubleSpacing, \OnehalfSpacing, \PackageError, \ProcessOptions,
% \RequirePackage, \advance, \baselineskip, \begin, \bgroup, \coordinate, \def,
% \discretionary, \egroup, \else, \end, \endinput, \endpgfextra, \fi, \fill,
% \footnotesize, \global, \hbox, \hilite, \ifdef, \ifdim, \ifx, \let, \marginpar,
% \marginparmargin, \marginparpush, \mbox, \newbox, \newcommand, \newcount,
% \newdimen, \newif, \p, \path, \pgfextra, \raggedright, \renewcommand, \sbox,
% \setSpacing, \setstretch, \st, \the, \tikz, \tikzset, \undefined, \usebox,
% \usetikzlibrary,\y,
% }
%
% \title{\textsf{proofread} --- Commands for inserting annotations}
% \date{\large\fileversion\quad\filedate}
% \author{Wybo Dekker\thanks{Email: wybo@dekkerdocumenten.nl}}
% \maketitle
%
%
% \begin{abstract}\noindent
% The |proofread| package defines a few \LaTeX\ commands that are useful when
% you proofread a latex document. These allow you to easily highlight text and
% add comments in the margin. Vim escape sequences are provided for inserting or
% removing these \LaTeX\ commands in the source. The package is based on code
% for a text highlighting command that was published by Antal Spector-Zabusky in
% \href{http://tex.stackexchange.com/questions/5959}{StackExchange}.
% 
% Options are provided for displaying the document with extra line spacing,
% and for display of it in either uncorrected or corrected state, both
% without margin notes.
% \end{abstract}
% \tableofcontents
%
% \section{Usage}
% Note: this package is based on the |soul| package, so if you plan to
% highlight non-ASCII characters, you must compile your source with either
% |xetex|- or |luatex|-based compilers.

% The commands described below display a highlighted phrase in your
% compiled document and place a comment in the margin, prefixed with a
% counter, which is indicated with |n| in the following. This
% counter is useful in the communication with the author of the document.
%
% Previous versions of this package used the standard \LaTeX\ |\marginpar| to
% create notes in the margin. However, although these will not overwrite each
% other, they can not be used in tables, minipages, footnotes and more.
% Therefore, this version creates margin notes using the |marginnote| package,
% in order to make them work in tables, minipages, footnotes and more. This
% implies that margin notes are placed at the vertical position where they are
% called, instead of being automatically stacked. So if several notes are
% generated on the same line, they overwrite each other. You can prevent this by
% \DescribeMacro{skp}
% prefixing the second note on the line with |\skp| or |\skp[1]|, the third note
% with |\skp[2]| and so on. Multiline notes may need larger numbers.
%
% The following supposes that you have installed vim-facilities as
% described in section~\ref{inst} (``Installing the Vim commands'').
%
% \DescribeMacro{\del}
% |\del{phrase}| displays \del{phrase} and places |n: delete| in the
% margin. In the |vim| editor, you can generate this code by selecting the
% \DescribeMacro{esc d}
% phrase and typing |<escape>d|. After typing this escape sequence, you
% will be in normal mode, behind the closing brace.
% \DescribeMacro{\yel}
% |\yel[comment]{phrase}| displays \yel{phrase} and places
% |n: comment| in the margin. In the |vim| editor, you can generate
% \DescribeMacro{esc y}
% this code by selecting the phrase and typing |<escape>y|.
% After typing this escape sequence, you will be in insert mode between the
% square bracket pair, ready to insert the \textit{comment}.
%
% \DescribeMacro{\add}
% |\add{phrase}| displays \add{phrase} and places |n: add| in the
% margin. In the |vim| editor, you can generate this code \emph{after} the
% \DescribeMacro{esc a}
% current cursor position by typing |<escape>a|, or \emph{before} the cursor
% \DescribeMacro{esc i}
% position with |<escape>i|.  After typing these escape sequences, you will
% be in insert mode between the braces pair, ready to type what should be
% added. 
%
% \DescribeMacro{\rep}
% |\rep{phrase}{replacement}| displays \rep{phrase}{replacement} and places
% |n: was: phrase| in the margin. In the |vim| editor, you can
% \DescribeMacro{esc r}
% generate this code by selecting the phrase and typing |<escape>r|.
% After typing this escape sequence, you will be in insert mode between
% the second pair of braces, ready to insert the new content.
%
% \DescribeMacro{\com}
% |\com{comment}| is used by |\del|, |\yel|, |\add|, and |\rep| to place
% |n: comment| in the margin. You can use it to place comment in the
% margin without text highlighting. In the |vim| editor, you can insert the 
% \DescribeMacro{esc c}
% command by typing |<escape>c|.
% After typing this escape sequence, you will be in insert mode between the
% braces pair, ready to type your comment.
%
% \DescribeMacro{\hilite}
% |\hilite[options]{phrase}| is the command on which the above commands are
% based. It was published by Antal Spector-Zabusky in
% \href{http://tex.stackexchange.com/questions/5959}{StackExchange}.
% It highlights the phrase with the default colour, yellow, using the
% default fill opacity, 0.25; but using the options, you can change this.
% For example,
% \hilite[fill=blue,draw=yellow,opacity=.5,line width=3pt]{this phrase}
% was highlighted with blue, with a 3pt width line in yellow around it,
% with the command:
%
% |\hilite[fill=blue,draw=yellow,opacity=.5,line width=3pt}|
%
% Both the fill color and the draw color get 50\% opacity, but you can set
% each individually with the |fill opacity| and |draw opacity| options.
% See the documentation of the tikz package for more options. 
%
% \section{Installing the Vim commands}\label{inst}
% The |proofread| distribution comes with a Vimball archive named
% |proofread.vmb|. Edit that file in vim and run the command: |:so %|. This will
% install the necessary files in your |~/.vim| directory, plus the Ruby executable
% |proofread| in your |~/bin| directory. The latter should be in your |PATH| of
% course, and you'll have to set its executable flag (|chmod +x ~/bin/proofread|).
% Finally, in order to use these facilities, you'll have to add this line
% at the end of your Latex source: |% vim: syntax=proofread|.
%
% The majority of the escape commands that are installed by this
% procedure have been described above. However, there are three others:
% \DescribeMacro{esc u}
% The vim sequence |<escape>u| will \emph{undo} the nearest of the three
% letter commands (|\del, \add, \yel, \rep, \com|) described above, which
% starts \emph{before} the current cursor position (which may be even on
% the first character after the starting |\|).  So if it sees
% |\del{something}| it will replace that with |something|, and if it sees
% |\add{something}| it will remove that. 
%
% \DescribeMacro{esc h}
% The counterpart is the |<escape>h| sequence, which will \emph{honor} the
% first command found before the cursor. If it sees |\del{something}| it will
% remove it, and if it sees |\add{something}| it will replace it with
% |something|.
% \DescribeMacro{esc n}
% This sequence will move your cursor to the next proofread command.
%
% The following table illustrates what happens with these two escape
% sequences:
% 
% \begin{tabular}{@{}lll@{}}
%                               &after |<escape>u|&after |<escape>h|    \\
% |\del{something}|             & something       &                     \\
% |\add{something}|             &                 &something            \\
% |\yel{something}|             &something        &something            \\
% |\yel[remark]{something}|     &something        &something            \\
% |\com{something}|             &                 &                     \\
% |\rep{old}{new}|              &old              &new                  \\
% \end{tabular}
% 
% As you see, both sequences simply undo |\yel| and |\com| commands, because
% they are comments, not corrections.
%
% \section{Package options}
% Options are provided, displaying the document in various spacing and
% correction modes.
% \DescribeMacro{onehalfspacing}
% The |onehalfspacing| option displays the document with 1.5 times the
% normal line spacing, 
% \DescribeMacro{doublespacing}
% The |doublespacing| option displays the document with doubled
% line spacing.
% \DescribeMacro{uncorrected}
% The |uncorrected| displays the document in its uncorrected state, without
% notes in the margin.
% \DescribeMacro{corrected}
% The |corrected| displays the document in its corrected state, without
% notes in the margin.
% \DescribeMacro{frame}
% Finally, the |frame| option is provided for visually handicapped users; 
% it causes .5pt black borders to be drawn around the colored backgrounds
% around \hilite[draw=black,line width=.5pt]{marked} texts. 
% \StopEventually{^^A
% \PrintChanges
% \PrintIndex
%}
%
% \section{Implementation}
%
%    \begin{macrocode}
%<*package>
%    \end{macrocode}
% Option handling:
% For the |onehalfspacing| and |doublespacing| options we need the setspace
% package, but the memoir class has its own version for this. So if
% |\DoubleSpacing| is defined, we redefined the other commands needed.
% The |PR@spaced| remembers if margin notes need a shift up.
%    \begin{macrocode}
\RequirePackage{marginnote}
\ifx\undefined\DoubleSpacing
  \RequirePackage{setspace}
\else
  \let\setstretch\setSpacing
  \let\onehalfspacing\OnehalfSpacing
  \let\doublespacing\DoubleSpacing
\fi
\newif\ifPR@spaced\PR@spacedfalse
\newdimen\PR@unit\PR@unit.6\baselineskip
\DeclareOption{onehalfspacing}{\onehalfspacing\PR@spacedtrue\PR@unit.525\baselineskip}
\DeclareOption{doublespacing}{\doublespacing\PR@spacedtrue\PR@unit.35\baselineskip}
%    \end{macrocode}
% The default is to show corrections; the |corrected| and |uncorrected|
% options will show the document without those in either corrected of
% uncorrected state. 
%    \begin{macrocode}
\newif\ifPR@corrected\PR@correctedfalse
\newif\ifPR@uncorrected\PR@uncorrectedfalse
\DeclareOption{corrected}{\PR@correctedtrue}
\DeclareOption{uncorrected}{\PR@uncorrectedtrue}
%    \end{macrocode}
% The frame option draws a black 0.5pt frame around colored areas for 
% the visually disabled.
%    \begin{macrocode}
\newif\ifPR@frame\PR@framefalse
\newdimen\PR@lw\PR@lw=0pt
\DeclareOption{frame}{\PR@lw=.5pt\PR@frametrue}
\ProcessOptions
%    \end{macrocode}
% The following code for a text highlighting command (here renamed to
% |\hilite| was published by Antal Spector-Zabusky in
% \href{http://tex.stackexchange.com/questions/5959}{StackExchange}.
%    \begin{macrocode}
\RequirePackage{soul}
\RequirePackage{tikz}
\usetikzlibrary{calc}
\usetikzlibrary{decorations.pathmorphing}

\newcommand{\PR@defhiliter}[3][]{%
  \tikzset{every hiliter/.style={fill=#2,fill opacity=#3, #1}}%
}

\PR@defhiliter{yellow}{.25}

\newcommand{\PR@hilite@Dohilite}{
  \fill [ decoration = {random steps, amplitude=1pt, segment length=15pt}
        , outer sep = -15pt, inner sep = 0pt, decorate
        , every hiliter, this hiliter ]
        ($(begin hilite)+(0,8pt)$) rectangle ($(end hilite)+(0,-3pt)$) ;
}

\newcommand{\PR@hilite@Beginhilite}{
  \coordinate (begin hilite) at (0,0) ;
}

\newcommand{\PR@hilite@Endhilite}{
  \coordinate (end hilite) at (0,0) ;
}

\newdimen\PR@hilite@previous
\newdimen\PR@hilite@current
%    \end{macrocode}

% \begin{macro}{\hilite}
%    \begin{macrocode}
\DeclareRobustCommand*\hilite[1][]{%
  \ifPR@frame%
    \tikzset{this hiliter/.style={#1,draw=black,line width=\PR@lw}}%
  \else%
    \tikzset{this hiliter/.style={#1}}%
  \fi
  \SOUL@setup
  %
  \def\SOUL@preamble{%
    \begin{tikzpicture}[overlay, remember picture]
      \PR@hilite@Beginhilite
      \PR@hilite@Endhilite
    \end{tikzpicture}%
  }%
  %
  \def\SOUL@postamble{%
    \begin{tikzpicture}[overlay, remember picture]
      \PR@hilite@Endhilite
      \PR@hilite@Dohilite
    \end{tikzpicture}%
  }%
  %
  \def\SOUL@everyhyphen{%
    \discretionary{%
      \SOUL@setkern\SOUL@hyphkern
      \SOUL@sethyphenchar
      \tikz[overlay, remember picture] \PR@hilite@Endhilite ;%
    }{%
    }{%
      \SOUL@setkern\SOUL@charkern
    }%
  }%
  %
  \def\SOUL@everyexhyphen##1{%
    \SOUL@setkern\SOUL@hyphkern
    \hbox{##1}%
    \discretionary{%
      \tikz[overlay, remember picture] \PR@hilite@Endhilite ;%
    }{%
    }{%
      \SOUL@setkern\SOUL@charkern
    }%
  }%
  %
  \def\SOUL@everysyllable{%
    \begin{tikzpicture}[overlay, remember picture]
      \path let \p0 = (begin hilite), \p1 = (0,0) in \pgfextra
        \global\PR@hilite@previous=\y0
        \global\PR@hilite@current =\y1
      \endpgfextra (0,0) ;
      \ifdim\PR@hilite@current < \PR@hilite@previous
        \PR@hilite@Dohilite
        \PR@hilite@Beginhilite
      \fi
    \end{tikzpicture}%
    \the\SOUL@syllable
    \tikz[overlay, remember picture] \PR@hilite@Endhilite ;%
  }%
  \SOUL@
}
%    \end{macrocode}
% \end{macro}
% Reduce minimum vertical space between margin paragraphs; if the memoir
% class is active, use the outer margin:
%    \begin{macrocode}
\AtBeginDocument{\marginparpush2pt}
\ifx\undefined\marginparmargin\else\marginparmargin{outer}\fi
%    \end{macrocode}
% We need a save box and a counter for prefixing the margin paragraphs:
%    \begin{macrocode}
\newcount\PR@markerno\PR@markerno=1
%    \end{macrocode}
% \begin{macro}{\com}
% Make a raggedright margin note, in footnote fontsize, prefixed with the counter
% plus a colon:
%    \begin{macrocode}
\newcommand{\com}[1]{%
  \marginnote{%
    \setstretch{1}%
    \raggedright%
    \footnotesize%
    \the\PR@markerno: #1%
  }[\PR@skip]%
  \global\PR@skip0pt
  \global\advance\PR@markerno1%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\skp}
%    \begin{macrocode}
\newdimen\PR@skip\PR@skip0\PR@unit
\newcommand{\skp}[1][1]{%
 \PR@skip#1\PR@unit%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\del}
%    \begin{macrocode}
\newcommand{\del}[1]{%
  \com{delete}%
  \hilite[red]{#1}%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\yel}
%    \begin{macrocode}
\newcommand{\yel}[2][]{%
  \com{#1}%
  \hilite{#2}%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\add}
%    \begin{macrocode}
\newcommand{\add}[1]{%
  \com{add}%
  \hilite[green]{#1}%
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\rep}
%    \begin{macrocode}
\newcommand{\rep}[2]{%
  \com{was: #1}%
  \hilite[blue]{#2}%
}
%    \end{macrocode}
% If one of the |corrected| or |uncorrected| options is used, redefine the
% above commands accordingly:
%    \begin{macrocode}
\ifPR@uncorrected
  \ifPR@corrected
    \PackageError{proofread}
      {corrected and uncorrected options are mutually exclusive}
      {You may not use both the corrected and uncorrected options}
  \fi
  \def\com#1{} \def\add#1{} \def\del#1{#1} \def\rep#1#2{#1}
  \renewcommand{\yel}[2][]{#2}\renewcommand{\hilite}[2][]{#2}
\else
  \ifPR@corrected
    \def\com#1{} \def\add#1{#1} \def\del#1{} \def\rep#1#2{#2}
    \renewcommand{\yel}[2][]{#2}\renewcommand{\hilite}[2][]{#2}
  \fi
\fi
\endinput
%</package>
%    \end{macrocode}
% \end{macro}
% \section{History}
% \begin{longtable}{@{}p{8mm}p{127mm}@{}}
% v1.00 & 2015/09/06\\
%       & First public release\\
% v1.01 & 2015/12/07\\
%       & running counter was sometimes not advanced\\
% v1.02 & 2017/02/28\\
%       & - Now works in tables, footnotes, minipages and more\\
%       & - package options frame, corrected, uncorrected added\\
%       & - package options doublespacing, onehalfspacing added\\
%       & - skp command for manual moving down marginnotes\\
%       & - vim commands are provided for removing notes,
% 	  either honoring or undoing the correction\\
% v1.03 & - 2018/07/31\\
%       & - added warning to use xetex or luatex for non-ASCII source\\
% v1.04 & 2019/04/25\\
%       & - removed overstriking in the \cs{del} command, as
%           it forces the text on a single line\\
% \end{longtable}
%\Finale
